marți, 19 ianuarie 2010

FOLIE CARBON


FOLII CARBON


ORACAL 975 Premium Carbon Structure Cast


Folia are o grosimea de 130
microni, ceea ce o face deosebit de flexibile, putand
fi aplicate chiar si pe cele mai dificile portiuni ale
masinilor sau pe suprafete curbe si neregulate.

L
atimea foliilor este de 1520 mm.


- Metraj: 47.50 Euro/mp
















































Caracteristici
Folie adeziva cast din PVC, compusa din mai multe straturi, cu stabilitate dimensionala remarcabila si caracteristici de aplicare optime.
Suprafata foliei adezive imita structura de carbon, folia pastrandu-si aceasta caracteristica chiar si in urma unui stres mecanic sau termic.

Grosimea foliei este de 130 microni, iar suportul este din hartie cu polietilena siliconata pe ambele parti, cu greutatea de 148 g/mp.
Adezivul este repozitionabil, permanent, transparent, poliacrilic pe baza de solvent.
Adezivul repozitionabil permite dezlipirea foliei si reasezarea acesteia pe pozitia dorita de cate ori se doreste. Folia se va lipi doar in momentul in care este presata cu ajutorul unei raclete.

Paleta coloristica cuprinde 5 culori:
- alb;
- negru;
- gri argintiu;
- antracit;
- maro.

Se livreaza in role cu lungimea de 50 m si latimea de 1520 mm, dar se comercializeaza si la metraj.
Latimea de 1520 permite colarea componentelor masinii (capota, plafon) dintr-o singura bucata, fara imbinari inestetice.

Durabilitatea in exterior este de 5 ani pentru expunerea verticala si de 3 ani pentru cea orizontala.


Recomandare

Seria ORACAL 975 Premium Carbon Structure Cast a fost special creata pentru decorarea masinilor, inclusiv pentru portiunile cu denivelari si a partilor greu de decorat cu alte folii (oglinzi, bare, praguri, etc).

Folia se indeparteaza usor, chiar si dupa o perioada indelungata de timp.


Fisa tehnica


ORACAL
975 Premium Carbon Structure Cast 2009

Description

Multilayer casted PVC film with outstanding dimensional stability and optimum application characteristics.
Surface with structured carbon effect, available in black and anthracite. Excellent keeping of surface finish
even after mechanical and thermal stress.

Release paper

PE-coated release paper on both sides, 148 g/m².

Adhesive


Solvent polyacrylate, repositionable, permanent, transparent

Area of use


Particularly developed for surface refinement in car design with highest requirements for durability and
solidity. Also suitable on uneven and arched surfaces. Good removability with appropriate equipment.

Technical data

Thickness* 130 micron

Dimensional stability adhered to steel shrinkage 0.1 mm max.

Temperature resistance adhered to aluminium, -50°C to +110°C, no variation

Seawater resistance adhered to aluminium, after 100h/23°C no variation

Resistance to solvents and chemicals at room temperature, 72h after adhesion to aluminium, shortterm
resistant to most oils and greases, fuels, aliphatic
solvents, weak acids, salts and alkalis

Fire behaviour adhered to steel, self-extinguishing
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
22 N/25 mm

Tensile strength (DIN EN ISO 527)
along min. 14 MPa
across min. 14 MPa

Elongation at break (DIN EN ISO 527)
along min. 70%
across min. 70%

Shelf life** 2 years
** in original packaging, at 20°C and 50% relative humidity
Application temperature > +8°C

Service life by specialist applicatio
under vertical outdoor exposure (normal climate of
Central Europe)
5 years (3 years horizontal)



Attention:
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any
contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should
be allowed to dry for at least three weeks and to completely cure respectively. The compatibility of selected
lacquers and paints should be tested by the user, prior to application of the material. If the film is used for
printing the ink must be thoroughly dried in order to avoid any affect on the later combination with a
laminating film as well as on the adhesive power and on the durability of the system. Furthermore the
application information published by ORAFOL is to be considered. The batch traceability according to
ISO 9001 is possible on the basis of the roll number.

(DIN 75200)
(without protective paper and adhesive)
** in original packaging, at 20°C and 50% relative humidity

Technical Data Sheet
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications customers
should independently determine the suitability of this material for their specific purpose, prior to use.

ORAFOL Europe GmbH - Orafolstraße 2 - D 16515 Oranienburg
Telefon: +49 (0) 33 01/864 0 - Telefax: +49 (0) 33 01/864 100
E-Mail: verkauf@orafol.de - Internet: http://www.orafol.de


Niciun comentariu:

Trimiteți un comentariu